6. Programming a motor from the start
6.1 Assigning remote control
Power the motor.
6.2 Checking the direction of rotation
Press «Roll up» or
«Roll down» to see the
direction of rotation.
or
NOT OK !!!
Press «Stop» from the
remote control.
The motor responds
x1
Press simultaneously «Roll up» and
«Roll down» from the remote control.
OK !!!
The motor responds
Press simultaneously «Roll up» and
«Roll down» from the remote control.
The motor responds
x1
GENERAL PROGRAMMING BANDALUX RADIO MOTORS
Press simultaneously «Roll up» and
«Roll down» from the remote control.
The motor responds
Go to
point 6.3.
x1
Go to
point 6.3.
x1
EN
41