Option 2, Shades In Programming Mode - Bandalux ELEGANCE 1 Mode D'emploi

1. Installation procedure
A
1.1 OPTION TOTALLY PROGRAMMED SHADES
FOR THE FOLLOWING ORDERS
1 shade with 1 single remote control
Several shades with several remote controls, where the association of
remote controls IS specified
Power the motor.
B
1.2 OPTION SHADES IN PROGRAMMING MODE
FOR THE FOLLOWING ORDERS
Ordering multiple shades with multiple remote controls, where the association
of the remote controls is not specified.
Only connect the shade that we are going to program, never connect more than one shade to perform
this step of the manual.
Cut off the power
source several times
5
The motor already works with the
programmed ends of rail.
Press simultaneously «Roll
up», «Stop» and «Roll down»
from the remote control.
The motor responds
x1
GENERAL PROGRAMMING BANDALUX RADIO MOTORS
Press «Prog» from
the remote control
(about 2 sec.)
The motor responds
2
x1
EN
37