Transmission Chain Tensioning And Lubrication - RIEJU TANGO 250 2014 Manuel Du Propriétaire

TRANSMISSION CHAIN TENSIONING AND LUBRICATION

Chain control and setting should be done only on the rear tyre axel, always concentrating on the chain's
maximum point of tension.
To control free-play, spin the back wheel several times and check the tension in various areas to find the
tensest point.
The motorbike should be placed on guard straight with its wheels on the ground and the chain setting
should be 20 to 35 mm. (it is recommended to realise this measurement with the elevated motorcycle of
the ground)
To regulate the chain, loosen the rear wheel axel, screwing or unscrewing the screws and nuts next to the
axel, making sure that the distance is always the same on both sides.
20 a 35 mm.
25