E.L.M. Leblanc TR 200 Mode D'emploi page 37

TR 200
The heating times can be set for the displayed
day/all days. For this, depress the button
(q).
The display (e) shows:
1. Start heating
6:00
4217-19.1/G
The required first starting time for heating is
set by depressing the button "–" (o) or "+" (p).
Briefly depressing the button alters the start-
ing time by 10 minutes, when the button is de-
pressed for a longer period the time runs fast-
er forward or backward.
When the required starting time is selected
depress the button
Now the respective first starting time for eco-
nomic operation must be set.
The display (e) shows:
1. Start econom.
22:00
4217-20.1/G
The required first starting time for economic
operation is set by depressing the button
"–" (o) or "+" (p).
Briefly depressing the button alters the start-
ing time for economic operation by 10 min-
utes, when the button is depressed for a long-
er period the time runs faster forward or back-
ward.
As soon as the required starting time for eco-
nomic operation is selected depress the but-
ton (q).
(q).
The display (e) shows:
2. Start heating
4217-21.1/G
Note: means that this starting time was
--:--
not programmed, i.e. only one start-
ing time for heating operation and
one for economic operation is pro-
grammed at initial operation (factory
pre-setting) or after a longer power
failure.
If required, the second starting time for heat-
ing operation can now be set as described
above, in the chapter "setting the first starting
time".
For the second starting time for economic op-
eration, as well as for the third starting times
for heating and economic operation (if re-
quired), please proceed as before.
In case that certain starting times are not re-
quired, depress the button
making any alterations.
If a displayed starting time is to be cancelled,
briefly depress the cancel button C (r) with the
tip of a pen. The display shows
When the required starting times are pro-
grammed depress the button
The display shows
Select day +/-
day as described above and enter the respec-
tive times.
Note: If the programme for one single day
was altered after having pro-
grammed all days of the week, the
display shows
times when the programme
is recalled. If one starting time is
now altered for all days of the week,
the original programme for the vari-
ous days is deleted and must be re-
programmed as described above.
(q) without
.
--:--
(q).
. Now select a
at all starting
--:--
All days
37