Vacuum Packing Using Vacuum Packing Devices; Vacuum Packing Using Hand-Operated Pump - CASO DESIGN VG 3000 Manuel D'utilisation Original

3.1 Vacuum packing using vacuum packing devices

Our Vacuum Glass Canister Set can be vacuum packed with all commercially available
vacuum packing devices with a hose connector. To do so, please connect the vacuum hose to
the device and the adapter to the vacuum canister valve.
For an optimal vacuum, please make sure that all components are firmly attached to the
following points during the vacuuming process:
• Connection of vacuum hose at the vacuum sealer (1)
• Adapter at valve on lid of canister (2)
Please note
► When using a chamber vacuum packing device, canisters only require 5 seconds to
become sufficiently evacuated. Please abort the vacuum packing process early to ensure
your canister is not damaged. Please proceed with caution to prevent damage!

3.2 Vacuum packing using hand-operated pump

You can also vacuum the canisters with CASO hand-operated pump.
Place hand-operated pump onto the middle of lid valve and pump until
you feel resistance (approx. 15-20 times for the small canister and
approx. 30-35 times for the large canister).
Please note
► Do not apply too much pressure on the canister lid while pumping,
do not lean on canister. Extrem pressure may damage the lid.
6