Jenn-Air JBL800 Mode D'emploi page 5

Masquer les pouces Voir aussi pour JBL800:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.Do not operate any appliance with a damaged cord or plug, or after the appli-
ance malfunctions, or is dropped or damaged in any manner. Return appliance
to the nearest authorized service facility for examination, repair, electrical or
mechanical adjustment. Call the Jenn-Air Customer Service Center at
1-866-982-3313 for assistance.
7.Using attachments not recommended or sold by the appliance manufacturer for
use with this model, including canning jars or ordinary jars, is not recommended
and may cause fire, electric shock or injury to persons.
8.Do not use the blender outdoors.
9.Do not let the cord hang over the edge of a table or counter. Do not let cord
contact hot surfaces, including stove.
10.Keep hands and utensils out of pitcher while blending to reduce the risk of
severe injury to persons or damage to the blender. A scraper may be used but
must be used only when the blender is not running.
11.Flashing light indicates ready to operate. Avoid any contact with blades or move-
able parts.When the blender is in the "ON" mode, and the touch control is illu-
minated, do not touch the blade assembly, interfere with blade movement or
remove the pitcher lid. Accidentally touching a speed control may activate
the blender.
12.Blades are sharp. Handle carefully.
13.To reduce risk of injury, never place the blade assembly on the power base with-
out the pitcher properly attached.
14.Always operate blender with the lid in place.
15.Never leave blender unattended while running.
16.Before blending hot liquids, remove pitcher lid cap from lid. Beware of steam or
hot vapor.When removing the lid, tilt lid slightly to direct steam away from
skin. Place a clean cloth over the lid cap opening to avoid splattering. Keep
hands and other exposed skin away from opening to prevent possible burns.
Start with slowest speed.
17.Do not use an extension cord with this blender.
To reduce the risk of electrical shock or fire, do not take apart the blender power
base. All repairs must be performed only by factory authorized personnel.
This product is designed for household use only. Do not use blender for other than
intended purpose.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING
4

Publicité

Table des Matières
loading

Table des Matières