Reference Data For Installation; Current Consumption And Inrush Current; Storage Capacity For Recorded Data; Number Of Cameras - Sony IPELA NSR Serie Manuel D'installation

H Audio input connector
Use this connector to input audio from a peripheral
audio device, such as a microphone.
Plug-In Power microphones are supported.
I Mini-SAS output connector
Use this connector to connect the mini-SAS cable used
for connecting an NSRE-S200.
The NSRE-S200 is an optional expansion storage unit.
J USB connector
Use this connector to connect a USB keyboard, mouse,
USB flash memory, or system controller
(RM-NS1000) to the NSR.
K LAN connectors (1 to 4)
Use these connectors to connect 10 Base-T, 100 Base-
TX, or 1000 Base-T network cables.
LAN1: Network cameras
LAN2: Network cameras
when using a different segment from LAN1.)
1) Connect remote clients to the network specified with the
[Network Interface for Remote Client] setting (either
LAN1 or LAN2) in the Server Configuration screen. For
details, refer to the User's Guide (PDF).
LAN3: Used for iSCSI storage
LAN4: Used for iSCSI storage
2) For details on using iSCSI storage, contact your Sony
dealer.
Caution
Do not configure LAN connectors 1 to 3 to the same
network segment.
L Monitor connectors (1 and 2)
Use these connectors to connect a monitor.
Monitor connector 1 (and monitor connector 1 on the
front of the unit) and G HDMI monitor connector 1
cannot be used at the same time, while monitor
connector 2 and G HDMI monitor connector 2 cannot
be used at the same time.
M Audio output connectors (L and R)
Use these connectors to output audio to a peripheral
audio device.
N Power supply connector
Use this connector to connect the power cord.
O Analog camera cable input connector
Use this connector to connect analog cameras via the
analog camera input cable.
The NSR-1050H is standard equipped with this
connector, but the NSR-1200/1100 requires an NSBK-
A16/A16H (optional) expansion.
10

Reference Data for Installation

1)
1)
(LAN2 can only be used
2)
2)
Reference Data for
Installation
Current Consumption and Inrush
Current
Model AC input
voltage
100 V
NSR-1200
220 V
100 V
NSR-1100
220 V
100 V
NSR-1050H
220 V
100 V
NSRE-S200
220 V
Storage Capacity for Recorded
Data
You can confirm the configurations and the hard disk
drive capacity of the NSR-1200/1100/1050H and
1)
optional expansion storage
in the NSR-1000 series logon screen, and viewing the
Information screen that appears. You can also confirm
2)
the actual storage capacity
recorded in the [Storage] tab of the Server screen.
1) Capacities for hard disk drives are approximations based on
the following equation for 1 GB: 1,000 × 1,000 × 1,000 =
1,000,000,000 bytes
2) Storage capacities are approximations based on the
following equation for 1 GB: 1,024 × 1,024 × 1,024 =
1,073,740,000 bytes

Number of Cameras

Maximum number of cameras
Model Maximum number of cameras
NSR-1200
NSR-1100
NSR-1050H
Full loading Inrush
current
2.66 A
1.14 A
1.84 A
0.79 A
13 A
1.75 A
0.76 A
0.79 A
0.34 A
by clicking [Information]
to which data can be
64
32
20