Canon Color imageCLASS MF820Cdn Mise En Route page 12

Connecting via a Wired LAN
1
Connect the LAN cable.
The IP address will be automatically confi gured in 2
minutes. If you want to set the IP address manually, see
the following items.
e-Manual "Network" ▶ "Connecting to a Network" ▶
"Setting IP Addresses"
2
Install the driver and software using the User
Software and Manuals DVD-ROM.
See "For details on the installation procedures:" (P.13).
Proceed to "Setting a Paper Size and Type" (P.13).
En
12
Connecting via a USB Cable
Connect the USB cable after installing the MF Drivers.
NOTE
• If you connected the USB cable before installing the MF
drivers, refer to the MF Driver Installation Guide.
1
Install the driver and software using the User
Software and Manuals DVD-ROM.
See "For details on the installation procedures:" (P.13).
2
Connect the USB cable.
Proceed to "Setting a Paper Size and Type" (P.13).