Beurer medical FT 90 Mode D'emploi page 11

The time flashes in the display (fig. 4).
• Use the MODE/MEM button to set the time and confirm with the LIGHT/
SET button.
In the 12h format, the time is displayed as AM/PM.
The temperature measurement unit flashes in the display (fig. 5).
You can set the device to display the temperature in degrees Celsius (°C) or
degrees Fahrenheit (°F).
• To display the temperature in Celsius, select °C using the MODE/MEM but-
ton and confirm with the LIGHT/SET button.
• To display the temperature in Fahrenheit, select °F using the MODE/MEM
button and confirm with the LIGHT/SET button.
The acoustic signal symbol flashes in the display (fig. 6).
You can activate/deactivate the acoustic signals (device activation, measure-
ment in progress, measurement completion).
• To activate the acoustic signals, select
confirm with the LIGHT/SET button.
• To deactivate the acoustic signals, select
and confirm with the LIGHT/SET button.
using the MODE/MEM button and
using the MODE/MEM button
30
Fig. 4
Fig. 5
Fig. 6