Xyron GLAMINATOR Guide De L'utilisateur page 4

Your safety as well as the safety of others is important to ACCO
instruction manual, and on the product are important safety messages. Please read
these messages carefully.
Please Note:
Use this unit only for its intended uses of cold lamination, thermal lamination,
and foil lamination.
Do not laminate empty lamination pouches.
Ensure that the machine is clear of pouches or carriers prior to inserting your
next item.
Keep your lamination rollers clean by feeding a cleaning card or clean piece
of paper through the machine on a regular basis.
For additional cleaning, unplug your machine and wipe only the exterior with
a damp cloth. Do not use any detergents or solvents.
Do not attempt service or repair on this machine yourself. Unplug the unit and
contact a Xyron representative for any required repairs.
Do not touch the heating plate of this unit as it may be hot.
The unit must only be connected to a supply voltage corresponding to the
electrical rating shown on the unit.
Unit should be connected to a socket outlet near the equipment that is easily
accessible.
Do not connect to multi adapters or use with an extension cable.
Failure to comply with these instructions can result in damage or injury and
invalidate your product's warranty.
4
Safety & Cleaning
®
Brands. In this