Saving An Image When The Memory Is Full; Turn Led Lights Off - Schweizer eMag 43 Notice D'utilisation

Saving an image when the memory is full

The eMag 43 can store a maximum of 15 images. If you try to store another image, the "Memory full"
is displayed in the bottom left corner.Before you can save another image you must delete one or more images
from the memory:
Press the red button
the check box.
Press and HOLD the red button
unchecked images are deleted.

Turn LED Lights Off

To avoid glare when viewing reflective surfaces you can turn off the LED lights.
Press and HOLD the green/yellow button and then press the red button
To turn on the lights again, press and HOLD the green/yellow button
button .
to advance to the desired image and then press the blue button
for 3 seconds to leave Storage mode. The new image is saved, and all
to clear
. The LED lights turn off.
and then press the red
EN
icon
19