Philips HD7827 Mode D'emploi page 15

4 Press the button indicating the number of cups
of SENSEO
®
- Press the 1-cup button q for one cup.
- Press the 2-cup button qq for two cups.
the sEnsEO
brewing.
- The machine automatically supplies the optimal
amount of water.
- You can interrupt the brewing process at any time
by pressing the on/off button 3. If you switch
the machine back on after having interrupted the
brewing process, the machine does not complete
the interrupted brewing cycle.
Do not remove the water reservoir during a
brewing cycle, as this causes the machine to
draw in air. When this happens, the next cup is
only partly filled.
Note: If no coffee comes out of the machine, you have
not flushed the machine before first use. As a result,
the boiler is not filled. Flush the machine as described
in chapter 'Before first use' before you start brewing
coffee. If only a small amount of coffee comes out of
the machine, flush the machine as described in section
'Flushing' in chapter 'Cleaning' before you brew another
cup of coffee.
5 Remove the coffee pod(s) after use by lifting
the pod holder out of the machine and
emptying it.
Be careful when you do this, for there may still be
some water/coffee on the coffee pod(s).
coffee you want to brew.
coffee machine starts
®
EnglisH
15