Ironside Prolaser 3D All-Lines Mode D'emploi page 6

• Do not remove or deface warning labels on the laser level.
• Do not disassemble the laser level, laser radiation can cause
serious eye injury.
• Do not drop the unit.
• Do not use solvents to clean the laser unit.
• Do not use in temperatures below -10°C or above 50°C
(14°F to 122°F)
• Do not operate the laser in explosive atmospheres such as
flammable liquids, gases or dust. Sparks can cause ignition.
• When not in use remove the battery, engage the pendulum lock
and place the laser in the carrying pouch.
• Make sure the pendulum lock mechanism is engaged before
transporting the laser.
NOTE
If the Pendulum lock mechanism is not engaged
before transportation, internal mechanical
damage may occur.
6
102494