Airfree And Mould; Airfree Description - Airfree E40 Manuel D'instructions

Guide for Airfree installation in mould contaminated rooms
1 - Install your Airfree unit in accordance with the user manual
2 - Allow your unit to run for at least one week to achieve significant airborne mould spore reduction.
3 - Clean mould infected items and surfaces, since they are a continuous source of new spores.
It is important to stress that Airfree will not destroy or remove mould from an infected item or surface. Those
surfaces must be cleaned manually.
Airfree will prevent spores released by existing mould colonies from contaminating other areas, and will
inhibit the growth of existing and new colonies.
llustration images based on Airfree Independent Test results. Results may vary depending on the room and
environment conditions.
1- Top Lid with Air outlets
and Anti-Stress Light
2- Side Shells
3- On/Off Led
4- Base
5- Air Inlets
6- Power Cord
7- Anti-Stress Light
Dimmer
The Airfree's anti-stress light has a esthetic effect and may be relaxing. It is possible to adjust the light
intensity using the dimmer at Airfree's base. The light does not intervene or has any relation with Airfree's
patented sterilisation core functioning. (*) Anti-stress lights not available in the Airfree E40/E60/E80/
E125.

Airfree and Mould

Without Airfree

Airfree Description

With Airfree
1
2
3
4
5
6
7
10