Introduction - glass 1989 MAWI SPA Notice D'installation, Utilisation & Maintenance

INTRODUCTION

This manual is designed to be used by installers. It describes
the systems and methods to be adopted for a correct installation
of the product.
The Spa is designed exclusively for domestic use.
The Spa satisfy all directives and is not dangerous to the end-
user if the installation, use, and maintenance are according to
the instructions supplied by the manufacturer, and on condition
that electrical and mechanical parts are maintained in perfect
effi ciency.
For this reason the instructions provided in this manual must be
meticulously followed.
The supporting structure is highly resistant.
The product is built to conform to standard low -voltage European
directives and electromagnetic compatibility directives (see the
technical sheet of the product).
SYMBOLS USED
IN THIS MANUAL
symbols described below are used in this installation manual
and on certain parts of the product itself.
CONVENTIONAL SYMBOLS AND THEIR MEANING.
WARNING
DANGER OF ELECTROCUTION.
Warn user that, if the described operation is not performed
observing safety regulations, there is a risk of electric shock.
WARNING:
GENERAL DANGER.
Warn user that, if the described operation is not performed
observing safety regulations, there is a risk of physical injury.
NOTE.
Inform the personnel involved - information that, if not observed,
may lead to minor injuries to people or damage to the product.
WARNINGS.
Inform the personnel involved -important information.
HYDRAULIC INSTALLER.
A skilled technician capable to install the product under normal
conditions and carry out all adjustments, maintenance and
repair jobs on mechanical parts as necessary. The technician is
not authorised to work on live electrical systems.
ELECTRICAL INSTALLER.
Qualifi ed technician capable of installing the product in normal
conditions. The electrical installer is in charge of all electrical
adjustment, maintenance and repair operations.
ENGLISH
After implementing suitable protection measures, if it is not
possible to operate with the power supply disconnected, the
electrical installer is able to operate in the presence of live parts
inside cabinets or electrical boxes.
WARNING
Inform features present only in some versions of the products.
OPTIONAL
Items present only if ordered.
CONSUMPTION MATERIAL
Items not provided by the manufacturer.
• Before installing the product, check that the fl oor where the
spa will be installed is suffi ciently levelled, that it can support
its weight (see installation preparations) and that all necessary
inlets and outlets have been provided.
• Product maintenance and setup must be performed exclusively
by specialised service personnel only.
• Remember that all inspection and protective panels must be
refi tted after maintenance or adjustment.
• Due to its weight and size, the appliance must be assembled
installed by more than one person.
• Do not tamper,disable or disconnect the product devices.
• In any case, do not create by-passes or use them for purposes
other than those for which they were installed.
• Do not remove or tamper with the inspection panels or the
wall, and do not remove or conceal the product identifi cation
labels.
• Installation of electrical devices (sockets, switches, lamps,
etc.) inside the bathroom where the appliance is to be installed
must be in compliance with current regulations.
• It is absolutely forbidden to use any type of electrical appliance
inside or next to the spa during use.
WARNING.
Do not use acetic silicone.
• Read the instructions supplied with the bottle to make sure
that the silicone is not acetic.
• If acetic silicone is used, acrylic parts might be damaged.
• If you need to replace any parts, contact your nearest service
centre and use original spare parts only.
• At the end of the product's life, do not abandon it in the
environment; contact a disposal fi rm.
WARNING.
The manufacturer declines all responsibility:
• If the installation and maintenance instructions contained
herein are not complied with.
• If the product is not used or installed in compliance with the
existing standards of the installed country.
• If the special maintenance is not carried out by qualifi ed
personnel.
Serial number (Figure A) to state in each intervention request.
15
SAFETY REGULATIONS