Startup - Wine Master HYGROMASTER Notice D'installation Et D'utilisation

3. STARTUP

Once the connections are made, place the switch on "0".
Close the lid and connect the water inlet.
Then power up.
Leave the lid closed when the switch is on position II.
Humidity set-point
adjustment
Switch position II: humidification
HYGROMASTER fills up.
The lid must be kept closed during this phase.
Adjust the set-point to the required range (between 60% and 80%).
If necessary the HYGROMASTER will humidify the air.
Switch position I: Dehumidification (*)
(*not available)
Switch position II:
humidification
(*)
Dehumidification
accessory
connection
Mains
connection
8