Installation Of The Hygromaster - Wine Master HYGROMASTER Notice D'installation Et D'utilisation

2. INSTALLATION OF THE HYGROMASTER

2.1 Hygromaster installation
Your HYGROMASTER can be suspended on a wall using screws in the holes
intended for this purpose or simply placed on the ground or on a stable shelf
preferably more than a meter away from the air-conditioner.
However, avoid placing your HYGROMASTER on a wooden support which would
absorb the moisture and could become deformed.
In any case, it is essential that the HYGROMASTER is level (horizontal).
Connection of the water inlet with the public water system or with a tank
containing a few litres for gravity feed will be performed using a male hose
connector, 1/4" cylindrical thread.
The direct connection to the water network is forbidden, use the
supplied water container
Please fulfill exclusively Hygromaster using demineralized water
to avoid any failure related to the scaling of the device.
Interdication of electric components under the Hygromaster.
The HYGROMASTER must be connected to a standard 230V, 16A, 50Hz earth socket.
4