Technaxx TX-29 Manuel D'utilisation page 64

By checking Alarm for motion the display shows a yellow walking man in the top right
channel corner when alarm occurs. If you have activated time and not motion you will see a
clock on the top right corner of the channel. For PIR sensor a yellow triangle with
exclamation mark is shown in the top right corner of the channel.
Bit rate Shows the data traffic of each channel.
Channel Shows information about the connected cameras sorted by the channel.
detail Also the installed camera firmware is shown.
IP camera Not supported for the included IP camera. Select the channel and choose
the way you installed the camera.
System admin:
System version
HDD Info
System log
User Management Add, Delete, Edit and Set password for user. By adding a new user
Shows the system information of the device. Like Hardware version,
software version and WEB support address. Over this link and your
Device ID you can access your device from every PC with an
internet connection in the world.
Shows the status of the installed HDD. Total size, used size and free
size. It also shows the Model name of the HDD.
Shows the different event types (All, Error, Device warning, Alarm
Record, Configuration changed, shutdown and boot up). Note: The
logs are only saved when a working HDD is installed (Logs are
saved on HDD)
you can choose what options the user is allowed to use.
Important: After the first login change the password of admin and
add a new user to use.
18