Maintenance Operations - Astralpool WATERLIFT Manuel D'instructions

Component
Pulling cable
(includes pin)
Chain
Chain pin
Step polyamide bearings
Step black runners
Chain polyamide bearing
Teeth counter optical sensor
Upper end of travel optical
sensor

9.3 Maintenance operations

DANGER OF ELECTROCUTION
Make sure that the power supply box is turned off before carrying out any maintenance operation.
CAUTION
Before taking the Waterlift out of the pool, ensure that there is a suitable support to carry out
the maintenance services.
Take special care not to damage the 24
equipotential connection during disassembly and disconnection.
During the disconnection and maintenance services, suitably protect the terminals and
protective tube, preventing them from coming into contact with the water. Thoroughly dry the
terminals before connecting them.
WARNING
Before carrying out any maintenance, assembly or disassembly work on the electric motor
components, leave the motor to cool down after continuous use.
Instruction Manual Waterlift rev.0.7 -06/09
Description
It fasten the moving step to the
drum, and thus enables the step to
go up and down and with the
movement of the drum.
It forms part of the transmission
system and connects the reducer to
the drum.
It joins the chain's links.
Mechanical support on the left-hand
side of the moving step on the
handrail bar.
Mechanical support on the right-
hand side of the moving step on the
handrail bar.
It supports the transmission system
chain and acts as a turnbuckle.
It counts the number of teeth in the
transmission system so that the
electronic system determines the
position of the moving step.
It detects the drum end of travel
position, and therefore the top
position of the moving step.
cable connections or the swimming pool's
V
cc
Maintenance
Ref. Astralpool
32409-5018
32409-5010
32409-5011
32409-4003
32409-4006
32409-5015
32409-5014
32409-5014
25/196