Safe Transport; Installation; Necessary Tools And Components; Before Installation - Astralpool WATERLIFT Manuel D'instructions

5 Safe transport

WARNING
Possible injuries and/or damage to the unit. The unit should be moved and handled by at least 2 to
3 persons.

6 Installation

6.1 Necessary tools and components

The tools and components required for carrying out a correct and safe installation are listed below:
Electric drill.
Ø 10 mm bit and conical bit for plastic.
Open-ended spanner kit.
Allen key kit.
Screwdrivers.
Work gloves.
Pliers to crimp terminals.
Pressure pliers.
Long-nose pliers.
2 sets of metal plug and screw DIN-571 Ø 8x70.
Spirit level.
Safety goggles.
Two-wire cable with minimum section of 6 mm
4.8 mm adaptor terminals.
Fastening plastic flanges.
Corrugated protective tube.
Bushing with suitable inner diameter for the chosen mains supply hose.

6.2 Before installation

NOTE
Due to the possible multiple swimming pool configurations where the Waterlift can be installed, the
indications in this manual are general and leave the details for the appropriate fastening and
connection of the supplied components up to the installer.
Instruction Manual Waterlift rev.0.7 -06/09
2 2
each. H07RN-2X6 mm recommended.
Safe transport
11/196