Unold SILVERLINE 86820 Notice D'utilisation page 17

1 Lower stand tube
2 Base
3 4 screws
4 Motor housing - upper
stand tube
5 Axle
6 Rear basket cover
7 Nut
1. Before assembling, ensure that
you are assembling the appliance
on a level, dry, place.
2. Remove all packaging materials
and transport safeguards. Keep
the packaging material, such as
plastic bags or Styrofoam away
from small children - danger of
suffocation!
3. Check whether all needed parts
are present.
4. Insert the lower stand tube into
the base (tab on the stand tube
must be fitted into the recess in
the base).
5. Fasten the stand tube with the
four screws by screwing them in
on the underside of the base.
6. Fasten the motor housing/upper
stand tube by screwing it into the
lower stand tube (turn clockwise).
7. Remove the nuts from the motor
housing.
8 Impeller
9 Fastening ring
10 Front basket cover
8. Fasten the rear basket cover on
the motor housing by fixing the
cover in place with the nut.
9. Place the impeller on the axle on
the motor housing. Fix the impel-
ler in place with the fastening ring
(turn counter-clockwise). Check
whether the fan blades move
freely.
10. Connect the front basket cover to
the rear basket cover. Ensure that
the holes for the fastening screw
at the bottom of the basket covers
are lined up. Fix the basket covers
in place with the screw.
11. Check whether all parts have been
correctly assembled and fixed in
place.
17