Chauvet INTIMIDATOR SPOT 160 Guide De Référence Rapide page 5

DMX Linking
The Intimidator Spot 160 can work with a DMX controller. Instructions for connecting and configuring this product for DMX
operation are in the User Manual. If you are not familiar with DMX, download the DMX Primer from www.chauvetdj.com.
Starting Address
To ensure full access to all channels available in each DMX mode, the highest recommended DMX address is 502.
Master/Slave Connection
The Intimidator Spot 160 uses the DMX data connection for its Master/Slave mode. Information about configuring the
Intimidator Spot 160 for Master/Slave operation is in the User Manual, which is available from the Chauvet website.
IRC-6 (Infrared Remote Control)
The Intimidator Spot 160 can be operated with the CHAUVET IRC-6. For more information about the IRC-6, download
instructions for the IRC-6 or the Intimidator Spot 160 User Manual from www.chauvetdj.com.
DMX Values
Gobos
1
2
11CH
Channel Function
1 Pan
2 Fine Pan
3 Tilt
4 Fine Tilt
5 Pan/Tilt Speed
6 Color Wheel
Intimidator Spot 160 QRG Rev. 2
QUICK REFERENCE GUIDE
3 4
5
Value Percent/Setting
000  255 0–540°
000  255 Fine control of panning
000  255 0–270°
000  255 Fine control of tilting
000  255 Pan/tilt speed (fast to slow)
000  006 White
007  013 Orange
014  020 Lime green
021  027 Cyan
028  034 Red
035  041 Green
042  048 Magenta
049  055 Yellow
056  062 Dark blue
063  064 White
065  189 Color indexing
190  221 Color cycling rainbow (fast to slow)
222  223 Stop
224  255 Reverse color cycling rainbow (slow to fast)
6
7
EN
8 9
4