GM Racing 7152 Instructions D'utilisation page 15

1. Select Battery
INC
Select Battery
LiPo S_less
- If Battery Type is changed, the " Cut Off Voltage" below is automatically changed to " Auto".
Warning: The wrong battery type setting can destroy your battery.
-
2. Cut Off Voltage
INC
Cut Off Voltage
Auto S_less
- Once battery type is changed, the cutoff voltage is automatically changed to " Auto" cutoff.
Auto cutoff voltages vary depending on each ESC model.
3. Power Curve
INC
Power Curve
Linerar S_less
-
4. Advance Timing
INC
Advance Timing
15 S_less
For sensored type motor, this applies to only forward, and it is not applied to brushed motors
-
5. Acceleration
INC
Acceleration
Normal S_less
This mode is designed to set time taken to reach wanted time after motor movement
-
6. Start Power
INC
START POWER
Normal S_less
DEC
Set LiPo / LiFe / NiMh(NiCd) using INC & DEC Buttons
DEC
Set Auto 3.0V ~ 14.0V(0.1V step) using INC & DEC buttons.
DEC
Set Soft / Linear / Hard using INC & DEC buttons..
DEC
Set 0 ~ 25 degrees(1 degree step, Sensorless) using INC & DEC buttons.
Set 0 ~ 10(1 step, Sensored) using INC & DEC buttons
DEC
Set Lowest / Low / Normal / High / Highest using INC & DEC buttons
DEC
Set Lowest / Low / Normal / High / Highest using INC & DEC buttons.