Arexx BS-30 Utilisation page 18

The naming convention for the log-files is:
m<id><year><month>.txt
in which
id: the id-number of the sensor in hexadecimal format
(4/8 bytes).
year: the year in 4 decimals
month: the month in 2 decimals
The format is comma separated text; and can be imported by the
temperature-logger software and in Ecel or Word for further proces-
sing.
The data in the LOG file
All data which refers to the file-name's criteria will be added to
the relevant data-file on the SD card. A data file starts with a file
header, followed by individual lines for each data-record for one
measurement data set.
<time-stamp>, <value>
in which
time-stamp: yyyy-mm-dd hh:mm:ss (UTC)
value: measurement data value in floating point format.
Delivered from an SD-card these data sets can also be imported to
a PC and processed with e.g. Excel-software. The SD-cards' data
however also can be imported to the logger software. Import from
the SD-cards to the logger software can be controlled by the import
function – see menu: file --> import.
Special functions
Update firmware
The firmware of the BS30 sensor can be (re)programmed by the
following steps:
1. Connect the sensor to the PC via USB
2. Press both switches RESET and PGM simultaniously, and release
the RESET before releasing the PGM switch.
3. Normally, a file explorer window will open up
(called 'CRP DISABLD') with one file called firmware.bin.
4. Delete this file
5. Move the new firmware.bin file to the empty folder
6. Start the BS-30 again by pressing the reset button
18
E
N
G
L
I
S
H