Philips HD7854 Manuel page 19

2 Pull the release tab at the front of the milk container lid cover
upwards to open the cover.
3 Pull out the steam inlet (this part remains attached to the lid by
means of a plastic strip).
Note: You can only open the steam inlet if the milk container lid cover is open.
4 Pull the milk tube off the milk container lid.
5 Clean the milk container, the milk container lid and the milk tube in
the dishwasher or with a washing-up brush in hot water with some
washing-up liquid. Rinse the parts with fresh water after cleaning.
Note: Cleaning in the dishwasher is recommended, especially when the milk
container is very dirty. In the dishwasher, all parts should be open or removed
as well.
6 Push back the steam inlet (1), connect the milk tube (2) and
close the milk container lid cover (3).
Note: Push back the steam inlet before you close the lid, otherwise the steam
inlet does not fit anymore.
Note: Make sure you push the milk tube far enough onto the connector so that
the holes in the connector are covered. If you do not push the milk tube far
enough onto the connector, you get less milk froth.
EnglisH
19