Schumacher Electric SPI10 Mode D'emploi page 13

DECLARATION OF CONFORMITY
We, Schumacher Electric Corporation
801 East Business Center Drive
Mount Prospect, Illinois, 60056, U.S.A.
certify that the Automatic Battery Charger Model SPI10 complies with the following standards:
Low Voltage Directive (LVD): 2006/95/EC (until 04/19/2016)
EMC Directive:
EN 60335-1:2012 + A11:2014
EN 60335-2-29:2004 + A2:2010
EN 62233:2008
and therefore conforms with the protection requirements relating to safety and electromagnetic
compatibility.
The year in which the CE marking was affixed is "2015".
Manufacturer:
Cory Watkins, President
September 15, 2015
Hereby declares that the equipment Model SPI10 is compliant to the DIRECTIVE 2011/65/EU OF
THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 (RoHS) on the restriction
of the use of certain hazardous substances in electrical and electronic equipment while:
The parts do not exceed the maximum concentrations of 0.1% by weight in homogenous
materials for lead, mercury, hexavalent chromium, polybrominated biphenyls (PBB) and
polybrominated diphenyl ethers (PBDE), and 0.01% for cadmium, as required in Commission
Decision 2005/618/EC of 18 August 2005.
September 15, 2015
President, Schumacher Electric Corporation – U.S.A.
2014/35/EU (from 04/20/2016)
2004/108/EC (until 04/19/2016)
2014/30/EU (from 04/20/2016)
• •
13