Chauvet DJ 4BAR LT USB Manuel De Référence page 3

Product Description
The 4Bar LT USB is a pack and go, complete wash lighting solution designed for mobile entertainers. Featuring wireless
DMX control with the convenient built-in D-Fi USB port (D-Fi USB sold separately), IRC compatibility, and additional
features allow for Master/Slave and auto/sound active modes. Each pod on the 4Bar LT USB has 3 high power, tri-
colored LEDs, which can be positioned independently to ensure total room or stage coverage. The tri-colored LEDs are
perfect for front lighting as they nearly eliminate multicolored shadows. Easily set up and tear down in minutes using the
included tripod, foot switch and carrying cases.
Overview
AC Power
This product has an auto-ranging power supply that can work with an input voltage range of 100-240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of disuse completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of 4Bar LT USB that can be linked at 120 V or at 230 V, see the User Manual or the Label on
this product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
4BAR LT USB QRG Rev. 2
QUICK REFERENCE GUIDE
D-Fi USB
DMX In/Out
Port
Control Panel
Fuse Holder
Power In
IR Sensor
EN
2