Advanced Bionics Sky CI M90 Mode D'emploi page 27

Pairing the Sky CI M90 to Phonak Accessories
Your Sky CI M90 can be paired to the following Phonak accessories:
• Phonak RemoteControl
• Phonak TV Connector
• Phonak PartnerMic
• Phonak Roger transmitters
• Phonak Sky Link M hearing instrument
Please refer to the accessory user guide for initial setup and pairing
instructions.
Switching between Multiple Audio Sources with the Sky CI M90
A phone call from a Bluetooth-enabled device has highest priority and
will pause other audio streaming from a connected device. In order to
switch audio streaming source, simply pause the audio from the current
source and start streaming from another source.
Placing the Sky CI M90 in Flight Mode
The Sky CI M90 communicates wirelessly with other devices in the
2.40 GHz to 2.48 GHz frequency range. When flying, some operators
require all devices to be switched into flight mode. Entering flight mode
will not disable normal sound processor functionality but will disable
Bluetooth connectivity functions.
Activating and Deactivating Flight Mode
1. Hold down either the top or bottom of the multifunction button while
attaching the battery.
2. Continue to hold down the button while the sound processor starts
up, until a long, solid orange LED is visible, approximately 10
seconds. Note that the start-up LEDs that indicate the battery life
of the rechargeable battery and the program number will be seen
before the long, solid orange flight mode LED.
3. Removing and reattaching the battery will take the sound processor
out of flight mode.
25