General Principles; Cooling Principles Of The Air Conditioner; Technical Specifications - Noaton AC 5109 Mode D'emploi

General principles

Before starting the air conditioner for the first time, please carefully read through the entire
instruction manual.
After taking receipt of the appliance, check it carefully to see whether it has suffered any damage
during transport. In the case of any damage, you must inform the sender immediately.
After transport, allow the air conditioner to stand in a vertical position for 6 hours before being
switched on.
Keep the packaging of the air conditioner stored in a safe place so that you can safely repackage the
unit and send it for a service, if required. In those places where it has been glued using sticky tape,
the packaging can be simply cut through and folded up for easier storage.

Cooling principles of the air conditioner

Cooling works best in spaces that have been well sealed, so that there is as little heat intake from
sunlight as possible. Leave doors closed, draw the curtains/blinds, and if possible try and cool the
room before using it. This procedure is especially suitable with e.g. bedrooms, which should be
cooled in advance before going to bed in order to avoid having to keep the air conditioner running
overnight.

Technical specifications

Power source
Dehumidifying capacity (30 °C, 80%
Maximum cooling capacity
Power consumption (cooling mode)
Cooling current
Operating temperature
Refrigerant type
GWP coefficient
Equivalent CO
Dimensions
Length and diameter of the air hose
Length of power cable
Inner diameter of the outflow hose
Net weight
Gross weight
Battery for the remote control
Model
Air flow
RV)
2
Noise
Noaton AC 5109
AC 220-240 V/1 Ph/50 Hz
330 m
2.3 l/h
9000 BTU
950 W
4.3 A
15°C–43°C
R290 / 0.2 kg
3
0.0006 t
55 dB(A)
320 x 320 x 740 mm
160 cm/Ø 151 mm
188 cm
16 mm
24 kg
28.5 kg
1x CR2025 – 3V
37
3
/h