Numan Two Manuel page 89

CURRENT PLAYBACK INFORMATION
During FM playback, the screen displays the RDS information, if available. The channel name
is displayed in the factory setting. By pressing the INFO button, you can display further RDS
information. Each time you press the INFO button, the following information is displayed in this
order: RDS radio text, RDS broadcast type, frequency and current date. If no RDS information is
available, only the set frequency is displayed.
SEARCH SETTING
Factory set, the FM search stops at any available radio channel. This may cause radio stations with
poor signal reception to hiss. You can change this by selecting only radio channels with good signal
reception in the search settings. To do this, select Menu > Scan setting > Strong stations only? (only
stations with good reception?) > Yes.
AUDIO SETTINGS
Set at the factory, all stereo stations are played back in stereo. This may cause interference with
channels that have poor reception. To play stations with poor reception in mono, select Menu >
Audio setting > FM weak reception: Listen in mono only > Yes.
89