Numan Two Manuel page 62

GENERAL OPERATION
After the initial setup, the device can be used in most modes. To select a mode, press the SOURCE
button until the desired mode is displayed on the screen. Press SELECT to select the desired
mode. The last channel or track selected in this mode is selected. If this is not possible, the device
searches for relevant channels, networks or requests you to make a valid entry. The modes are
described in detail later in the operating instructions. In all playback modes, the controls for volume
adjustment, mute and play/pause are the same.
MENU NAVIGATION
The rotary control is the main control to select the different menus and options. Turn the rotary
control to move up or down in the menu. Press the control dial when the desired option is
highlighted to confirm your selection. All menus and lists function as a loop, which means that
if you continue to turn the rotary control at the first or last item, you move to the other end of the
menu/list. So if you turn the rotary control to the left at the first entry, you will get to the last menu
entry, etc. The symbol ">" is displayed on the right side of the screen if there are other options above
or below the visible options.
62