Alesis Fusion 6HD Guide D'installation Rapide page 20

The four Control Knobs now correspond to Frequency, Resonance, Envelope Amount, and
Key Track. Play some notes as you rotate the Envelope Amount knob and you'll hear your
tone change (you'll also notice the on-screen knob changes to reflect the position of your
settings.)
Saving your edited programs....
You may have noticed a small "e" toward the top of certain pages (if not, you will see this icon
appear on many of the images below). This icon indicates that your sound has been edited.
Now that you've modified the original program, you may want to keep it—in which case, you'll
need to save it somewhere. Here's what you do.
1. Press STORE (adjacent to the control wheel). The screen will look like the one below.
2. Because this sound is a Preset sound it can't be overwritten. You will be saving it to a different
location.
At this point, you are ready to save your program. Use the following steps to write your
program to a new location:
1. Use the NEXT and PREV buttons to position the cursor on the ROM Bank field (currently
shown as "ROM: Preset 2) and select your preferred storage Bank using the control wheel.
You have the ability to save it a Compact Flash card (if you have one inserted) or to the
internal hard drive of the Fusion. These will appear onscreen as either CF or HD; for example,
CF:My Bank.
2. Now, use the NEXT and PREV buttons to position the cursor on the location field within the
bank (currently shown as E-5) and select your preferred location using the control wheel.
3. Press STORE (either the soft tab button on the upper right of the display, or the dedicated
STORE button.
18