Alesis Fusion 6HD Guide D'installation Rapide page 16

Playing Sounds
Your Fusion workstation ships with an incredible assortment of Programs (in the Fusion, we
refer to individual sounds as "Programs.") Let's take a brief tour of how to find and play these
programs.
Selecting sounds is easy. Just do the following...
1. Press the PROGRAM button
This takes you to Program mode in the Fusion. If you are already in Program mode, pushing
this button again will make sure you return to the "top level" of the mode.
2. Press Category Button
The "Category" button takes you to the Fusion's "Explorer." The Explorer lists each instrument
Category on the Fusion and also lists what Programs are contained within each category.
Category names are listed on the left, whereas actual Programs are on the right.
3. Press the "A" button
This switches your Category to "Piano." You'll notice the category names are written above
the "A" through "P" keys on the Control Panel. When you press the "A" through "P" keys in
Category mode, you'll jump to the corresponding Category in the Explorer.
4. Use the Control Wheel (or the Inc/Dec buttons) to select a sound
Once you highlight a Program name, you can use the Control Wheel (or the Inc/Dec) buttons
to cycle through all the different sounds in each category of sounds. Once a program is
loaded, you can play that program from within the Explorer. This makes finding the right sound
easy.
5. Press PROGRAM.
Play the sound while on this screen to make sure it's the one you want. If you want to return to
the regular Program mode press Program again. This will return you to the top of the Program
section.
14