• The connection between the device and the electrical network may employ a 3 meter
long (max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs
or gangs is prohibited because of the danger of fire that is involved with this.
• Make sure that the power cable is undamaged and has not been installed under the ice
maker or over hot or sharp surfaces.
• The electrical outlet must be protected by a 16A safety cut-out switch.
• The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. If in doubt, have the house installation
checked over by a qualified electrician. The manufacturer cannot be made responsible
for damages that are caused by a missing or damaged protective conductor.
14 Design and Function
In this chapter, you'll find important information on the design and function of the device.
14.1 Overview and assembling
1 measuring cup
7 handle of jar
11 insulation pad
Use of pusher
► Take the measuring cup out of the lid and insert the pusher into lid hole. You can use
the pusher to push food into the jar.
► Use the pusher only when the device is working on mininum level.
2 lid
3 jar 4 blades
8a intake of gear
12 safety switch
5 blade base
6 handle of lid
9 extra gear (2 pcs) 10 motor unit
13 knob
14 pusher
30