Design And Function; Overview And Assembling; Rating Plate - CASO DESIGN B 3000 Touch Mode D'emploi

 The electrical safety of the device is only guaranteed if the device is connected to a
properly installed protective conductor system. Operations using an electrical outlet
without a protective conductor are prohibited. If in doubt, have the house installation
checked over by a qualified electrician.
The manufacturer cannot be made responsible for damages that are caused by a
missing or damaged protective conductor.

14 Design and Function

In this chapter, you'll find important information on the design and function of the device.
anti-clockwise until the triangle points to open lock-symbol
Please note: Use of pusher
► Take the measuring cup (middle part of lid) out off the lid and insert the pusher. With the
pusher you can push the ingredients into the jar.
► Use the pusher only when the device is not working.

14.2 Rating plate

The rating plate with the connection and performance data can be founded beneath the
device.
Caso B 3000 Touch

14.1 Overview and assembling

1. pusher
2. measuring cup (middle part of the lid)
3. lid 4. jar
6. sealing ring
8. anti-vibration pad
10. display 11. base with motor
12. touch-panel
14. power cord with plug
15. reset-button
Assembling:
Place the measuring cup (middle part of lid)
into the lid so that the triangle points to the
open lock-symbol
cup (middle part of lid) clockwise, until the
triangle points to closed lock-symbol.
Place the lid with measuring cup
(middle part of lid) into the jar.
Check that the anti-vibration pad is placed
well on the base.
For removing take the lid at the handle and
turn the measuring cup (middle part of lid)
5. blades
7. drive shaft
9. safety switch
13. feet
and turn the measuring
.
40