Depaepe Telecom Securphone Notice D'utilisation page 26

Dialling mode
Dialling mode can be selected. See "SETTINGS PROGRAMMING" section,
pages 28-30
NOTE: When dialling in the pulse mode, depressing key # or * automatically
switches to tone dialling, giving access from a pulse PABX to tone systems.
When returning to on-hook, the telephone automatically turns back to pulse mode.
Memory programming-erasing (22 digits)
There are 2 different memory programming modes:
- Mode 1 is intended for the
model with automatic dialling of a programmed number when picking up the
handset.
- Mode 2 is intended for the
dialled out when depressing memory keys).
To record digits into the memory keys or to program settings, use the small
keyboard located on PCB inside the unit.
Programming
Keypad
-Mode 1 is intended for the
model (Automatic off-hook dialling):
Securphone
1) Make sure
2) Lift the handset.
3) Depress "PGR" key located on the small keypad (Located inside the unit).
A "beep" sound should be heard through the receiver.
4) Depress "P" (Pause) key located on the small keypad.
A "beep" sound should be heard through the receiver.
5) Dial the telephone number to store including *, # or "Pause" if needed (22
digits maxi).
6) Press "MX" key.
A double "beep" sound confirms the right storage.
7) Replace the handset on hook.
Securphone
"Urgence" and "Urgence à clavier"
Securphone
Securphone
"Urgence" and "Urgence à clavier"
is connected to the line.
1, 2, 3 or 4. Programmed numbers are