Lincar 149A Serie Instructions D'utilisation Et D'entretien page 37

For Gaia model : take away the radiant plate, the little clap for tank and the oven plane,
•
( Fig.10), now You can reach every part of the exhaust fumes that should be cleaned.
Aurora – Valentina models : take away the radiant plate, than lift and remove the oven
•
structure, employing the little brush ( accessories enclosed ) clean the equipment sides
from combustion residuals and ash.
Employing brush, vacuum-cleaner, and shovel, clean the equipment on the inside parts
•
from combustion residuals. After cleaning operations, all the equipment parts should be
assembled again rightly.
Attention : during reassemble phase, make attention to the sense of direction of oven's
•
wrinkles. ( Fig.12)
We recommend to check always, for an eventual cleaning, the connection tubes between
•
the equipment and the flue.
IT IT IT IT- - - - EN EN- - - - FR FR- - - - ES
EN EN FR FR
Fig. 12
Fig.12 Oven : The oven's wrinkles
should turn towards the high
37/80
ES mod. 149A EN13240
ES ES