Bellman & Symfon BE1441 Manuel D'utilisation page 39

Appendix (EN)
77 Testing the connection
77 Testing the landline telephone
78 Battery backup
79
Advanced programming
79
Deleting advanced programming
76
Testing the connection
A Visit transmitter set to the same radio key as the flash receiver is required to test the system. You
will need a bed shaker accessory to test the vibration.
1 Press the transmitter test button(s).
2 The flash receiver will:
Start to flash

Light up the corresponding Visit LED

 If a bed shaker accessory is connected, it will start to vibrate.
1
Testing the landline telephone
1
Connect the flash receiver to an analogue telephone socket via the telephone Input.
You will need a telephone flex cable accessory and an adapter plug accessory.
2
Use for instance your mobile phone to call your landline telephone. The flash receiver will start
to flash and light up the yellow Visit LED. If a bed shaker accessory is connected, it will start to
vibrate To repeat the last indication, press the flash receiver test button.
1
2
2
App
77