Starting Up - Gram PLUS Mode D'emploi

Starting up

Code/parameter setting
Temperature setting
Display
-
+
1 2 3 4 5
P
Rapid thaw Keylock
Defrosting Start/stop
Dry refrigeration
Plug in the cabinet
To start, press the START/STOP key.
The figures shown in the display give the actual cabinet temperature and indicate that
power is connected.
If the cabinet does not start immediately, and lights, it is because defrosting is
taking place.
P +
1 3
+
To cancel the defrost program, press keys for more than 6
seconds.
is turned off.
Servicing:
Make sure the appliance is switched off at the socket before service is performed on
electrical parts. It is not sufficient to switch off the cabinet by the START/STOP key as
there will still be voltage to some electrical parts of the cabinet.
76-504-0930 18