Publicité
Les langues disponibles
Les langues disponibles
A1
1.
Place the holes in log #1 on A1 and A2. Ensure
PLACE TEXT BOX HERE.
the notch fi ts around the pilot shield.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Ember
Locations
2
3.
While pulling log #2 slightly forwards, place the
PLACE TEXT BOX HERE.
holes in log #3 on C1 and C2. Do not cover any
NOTE: ENSURE NOMENCLATURE IS
burner ports. Apply glowing embers to any
CONSISTENT THROUGHOUT.
visible spaces on the front and middle
sections of the burner tube (not pictured). *
* NOTE: Place glowing embers to the front of the large clusters of ports. The burner has been designed
to have large fl ames in these locations. If not, blue fl ames will be present.
Notch
2
5
5.
Place log #4 on the media tray, ensuring the
PLACE TEXT BOX HERE.
left side rests on log #5 and the notch fi ts
NOTE: ENSURE NOMENCLATURE IS
under the third grate post.
CONSISTENT THROUGHOUT.
Wolf Steel Ltd., 24 Napoleon Rd., Barrie, ON L4M 0G8 Canada
1
Notch
A2
NOTE: Holes on
bottom of log
(
(not illustrated).
3
1
C2
C1
1 1
3
4
2
B2
B1
2.
Place the holes in log #2 on B1 and B2.
PLACE TEXT BOX HERE.
Do not cover any burner ports.
NOTE: ENSURE NOMENCLATURE IS
CONSISTENT THROUGHOUT.
Notch
2
5
4.
Place log #5 on the media tray, ensuring the
PLACE TEXT BOX HERE.
notches fi t under the fi rst and second grate
NOTE: ENSURE NOMENCLATURE IS
posts.
CONSISTENT THROUGHOUT.
Bumpout
Notch
2
5
6.
While pulling log #1 slightly forwards, place the
PLACE TEXT BOX HERE.
bumpout on log #6 into the notch in log #1,
NOTE: ENSURE NOMENCLATURE IS
resting the opposite end on log #2. Once in
CONSISTENT THROUGHOUT.
position, ensure the bottom end of log #6
is situated as far to the left as possible.
• 1(866)820-8686
1
1
1
3
6
1
1
3
4
W415-1975 / B / 05.16.19
• www.napoleon.com
Publicité
