Fellowes Extend Sit Stand Mode D'emploi page 3

ASSEMBLY
STEP 4
Insert M8 Arm
• Place the M8 arm into the socket on the base and re-insert
the 180° stop screw.
STEP 5
Prep Lower Arm
• Remove the plastic cable cover from the lower arm.
STEP 6
Attach Keyboard Platform
• Attach the keyboard platform to the lower arm using four
M6x10mm flat head machine screws and the included
metal plate.
STEP 7
Attach Lower Arm to Base
• Remove the 180° stop screw from the M8 arm head.
• Place the lower arm with keyboard platform into the M8
arm socket, and reinsert the 180° stop screw.
4
ExtendSitStand_872201_RevD_10L_080516.indd 4-5
E
X
C
A
L Y
I
H
A
A
X
E
STEP 8 - (FOR DUAL MONITOR SIT STAND)
Attach Crossbar
• Attach the monitor crossbar to the upper arm using
2 M5x14mm flat head machine screws and one M6x30mm
flat head machine screw.
STEP 9
Attach Upper Arm
• Slide the upper arm assembly down onto the lower arm and
secure it with a M6x20mm flat head machine screw.
STEP 10
Attach VESA Plate
• Attach the VESA plate to your monitor(s) using four
M4x8mm pan head philips. If necessary, use the included
plastic spacers and extended M4x18mm pan head philips.
STEP 11
Attach Monitors
• Slide the monitor(s) onto the monitor quick release until it
snaps into place.
Y
R
X
S
Y
B
K
A
M/N
G
5
8/8/16 10:03 AM