Operation; Surface Installation - Kemper 131 00 Consignes De Sécurité Importantes Pour Le Montage

EN 3
3.1

Surface Installation

Shutting off
1
Close valve by turning
operating cap (1) to the
right.
Cleaning of Valve Seat
2
By the closing of the
valve, the valve seat ist
automatically cleaned.
20 /88 – K410054000001-00 / 05.2022 – © www.kemper-olpe.de

Operation

Max. a half turn (10 teeth) to
the right: Corresponds to reduc-
tion of the value by 2 K.
Note!
After this, the valve has
again to be fully opened
(left turn to end position).
Note!
Do not over-tighten the
end position buffers!