Installation; General - Kemper 131 00 Consignes De Sécurité Importantes Pour Le Montage

EN 2
2.1

General

Install the valve into flow direc-
tion; see flow direction arrow on
the housing.
Because of contents or larger
particles suspended in the water,
it is recommended, especially
for older pipe-systems, but also
in case of first start-ups, to flush
out the system extensively to be
able guaranteeing design-con-
form operation of the regulating
valves.
18 /88 – K410054000001-00 / 05.2022 – © www.kemper-olpe.de

Installation

Note!
The integrated shut-off
spindle must always
be turned left up to the
end position for correct
function of the
regulating valve.
Note!
The minimun depth for
concealed installation
from the pipe centre line
is 56 mm.