List Of Materials - Zephyr Titan Island AK7736BS Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
Quantity
1
MODELS: AK7736AS, AK7742AS, AK7748AS
4
2
2 PARTS SUPPLIED
1
1 - Hood
4 - Duct covers, 2 upper & 2 lower
4
2 - Support frames, 1 upper & 1 lower
6 2- Angled support brackets
1- Middle support frame
2
4 - Baffle filters, AK7736AS & AK7742AS
6 - Baffle filters, AK7748AS
4
2 - LED light bulbs, AK7736AS & AK7742AS
1
4 - LED light bulbs, AK7748AS
1 - 8 in. round starting collar (for single blower ducting)
1
1 - Paper ceiling template
1
1 - Hardware package
*
M4 x 8 (12) screws are pre-installed into the support frame
Ducting, conduit and all installation tools
PARTS NOT SUPPLIED
- Ducting, conduit and all installation tools
Cable locking connector (if required by local codes)
- Cable connector (if required by local codes)
Dual internal blower (PBD-1300B)
- Duct cover extension accessory (Z1C-0077 - 36", 42")
- Duct cover extension accessory (Z1C-0177 - 48")
RF remote control (14000005)
- Dual blower kit (PBD-1300A)
Duct cover extension (36" & 42" models) (Z1C-0077)
Duct cover extension (48" model) (Z1C-0177)
Titan Island Use, Care, and Installation Guide
Parts Supplied
Duct covers, 2 upper & 2 lower
Support frames, 1 upper & 1 lower
Angled support brackets
Middle support frame
Pro baffle filters (36" & 42" models)
Pro baffle filters (48" model)
Swivel LumiLight LED, 6W (pre-installed) (36" & 42" models)
Swivel LumiLight LED, 6W (pre-installed) (48" model)
8" round starting collar (for single blower ducting)
Paper ceiling template
6# x 1" (6) 6# x 1-1/2" (6)
6# x 1" (4) 6# x 1-1/2" (4)
M4 x 8 (6)
Wire Caps(3)
M4 x 8 (14)
M4 x 8 (12) 3/16*7/8 (4)
M4 x 10 (16)
Parts Not Supplied
Part
Hood
Hardware package
6# x 2" (6)
6# x 2" (4)
5x24mm Washers (6)
(1) M4 x 12
3/16*7/8 (4)
safety screw
4
4

List of Materials

www.zephyronline.com www.zephyronline.com
3/16 x 1/4" (4)
7