Troubleshooting; Technical Data; Disposal - Cleanmaxx JC-220H Mode D'emploi

Troubleshooting

If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device does
not work. / The
control lamps do
not light up.
No steam is
emerging.

Technical Data

Article number:
Model number:
Voltage supply:
Power:
Protection class:
Type of protection:
ID of operating instructions:

Disposal

Dispose of the packaging material in an environmentally friendly manner so that
it can be recycled.
This device is governed by the European Directive 2012/19/EU on waste electri-
cal and electronic equipment (WEEE). Do not dispose of this device as normal
domestic waste, but rather in an environmentally friendly manner via an offi cially
approved waste disposal company.
01123_01345_Inlay_DE-EN-FR-NL_A5_V3.indb 23 01123_01345_Inlay_DE-EN-FR-NL_A5_V3.indb 23
23
Possible cause / solution
• Is the mains plug inserted in the plug socket correctly?
• Is the plug socket defective? Try another plug socket.
• Check the fuse of the mains connection.
• Is the On / Off switch (13) in position I?
• The device is not yet ready to operate. The device needs to
heat up for a few seconds before steam can emerge.
• The water tank (11) is empty. Fill the water tank.
• Is the water tank not inserted in the main unit (5) correctly?
Check the fi t.
• The attachment (19, 20) or adapter (18) is blocked.
Clean the attachment or adapter.
01123 (gold / white)
01345 (red / white)
JC-220H
220 – 240 V ~ 50 Hz
1300 W
I
IPX4
Z 01123_01345 M DS V3 0819
EN
All rights reserved.
15.08.2019 16:20:07 15.08.2019 16:20:07