Direct Healthcare Group SystemRoMedic WalkingVest Manuel Utilisateur page 4

Description of the WalkingVest
1
5
Application of the WalkingVest in a seated position
4
3
4
WalkingVest consists of:
1. Lift loops (grey)
2. Waist belt (red)
3. Leg harness (black)
4. Padding for leg harness
5. Padding for vest
The lift loops are connected to the slingbar. The waist
2
belt and leg harness are equipped with a quick-release
buckle for easy application. The leg harness is fitted
around the thighs, from back to front. The leg harness
is padded to prevent pressure and chafing at the groin.
The lift vest is also padded at arm height to prevent
pressure and chafing.
1. Place the WalkingVest around the upper body with
the buckle on the front. The lower edge of the vest
is positioned above the hip joints. The arms are held
outside. The mid-section of the vest should follow the
patient's spine.
2. The waist belt is connected and adjusted to the size
of the patient.
SystemRoMedic
M A N U A L
TM