hestan KSO 30 Mode D'emploi page 6

LOCATION AND INSTALLATION
STEPS FOR INSTALLATION
The following pages provide the necessary information for proper installation of the oven and
are arranged as follows:
EN
• Technical data (Electrical ratings and maximum connected load).
• Oven Door Removal - optional
• Installation cutout dimensions, required clearances and mounting instructions for:
- Wall or under-counter installation, single oven
- Wall installation, double oven
- Flush installation
• Electrical supply and wiring requirements, electrical connections for 3-wire or 4-wire branch
circuit. Programming required if connecting to 208 volt circuit.
• Final checklist.
TECHNICAL DATA
UPPER CAVITY
OVEN DOOR REMOVAL
To reduce weight during installation or to fit through a very narrow door opening, the oven
door(s) can be removed. Remove only if necessary.
Make sure oven is cool and power to the oven has been turned off before removing the door.
Failure to do so could result in electrical shock or burns.
• The oven door is heavy and fragile. Use both hands to remove the oven door. The door
front is glass. Handle carefully to avoid breakage.
• Grasp only the sides of the oven door. Do not grasp the handle as it may swing in your hand
and cause damage or injury.
• Failure to grasp the oven door firmly and properly could result in personal injury or product
damage.
4
©2019 Hestan Commercial Corporation
Oven Model
SINGLE OVEN
DOUBLE OVEN
LOWER CAVITY
(CONTINUED)
Electrical Ratings and Maximum Connected Load
@ 120/240 Volts 60 Hz
Amperes kW
16.9 3.84
Amperes kW
33.8 7.68
@ 120/208 Volts 60 Hz
Amperes kW
17.5 3.54
Amperes kW
32.4 6.48