Renkforce AN-8006 Notice D'emploi page 64

Masquer les pouces Voir aussi pour AN-8006:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

TAVOL
In case of traffic reports and activated TA function, the preset volume is selected.
Set the desired volume by turning the volume control/selection control (2).
EON
Here you define whether the RDS-EON function is activated or deactivated (explanation see "RDS as reception
concept" further down in this manual).
ON:
The EON function is activated.
OFF:
The EON function is deactivated
DSP
Here you can set up the integrated signal processor.
DSP NONE:
The digital signal processor is switched off.
DSP CLAS:
The sound characteristic is adapted to classical music.
DSP ROCK:
The sound characteristic is adapted to rock music.
DSP POP:
The sound characteristic is adapted to pop music.
DSP FLAT:
DSP is active, but there is no sound adaptation.
If the DSP is activated, it is not possible to control the sound via the bass/treble controls.
LOUD
Here is where you set the LOUDNESS sound correction.
LOUD ON:
The loudness function is active.
LOUD OFF:
The loudness function is inactive. The sound is not influenced.
At low volumes the human ear does not perceive very low sounds well. An increase of the frequency
range for low volume (loudness correction) counteracts this effect and the music replay sounds more
natural.
64
Operating instructions
English

Publicité

Table des Matières
loading

Table des Matières