Technical Data - Steca SI 612 Manuel D'utilisation Et De Montage

Technical data

Model SI
Input voltage (Unom) [V]
Nominal power [W]
« Standby » current [mA]
Power « ON » no load [W]
Power « ON » no load [W]
TWINPOWER system
Maximum efficiency [%]
Length L x 124 (H) x 215 (W) [mm]
Weight [kg]
Input voltage
Dynamic correction of Umin.
Output voltage
Distortion
Dynamic behaviour
Frequency
Charge detection (standby)
Maximum power 15 min
Maximum power 3 min
Peak power 5s
Asymmetric load
Cos ϕ
Protections
IP protection index
Forced ventilation
Overheating protection
Required battery capacity
Acoustic level
EEC conformity
Options
3-phased system (per unit) from SI 1200
TwinPower system from SI 1200
Top cover IP 23
Potential free alarm contact (60V/0.5A) for all models
Solar charge controller 16A/12-24V for SI 600 and SI 800
Industrial casing in 19'' rack – 3U x 400 mm from SI 1200
Other specifications on request (Ex: 115V/60Hz).
These data are for information only and may change without notice.
User manual
612 812
624 824
648
12/24/48 12/24 12/24/48
600 800
25/21/10 25/21 25/21/12
2.6 2.8
-------- -------
91 92 93 - 95
276 276
6.9 10.4
Min. - Max.: < Unom x 0.95 to Unom x 1.33
- 10% at Pnom
True sine 230 Vac ±3%
< 2% (at Pnom)
From 0% to 100% load change. Normalization: 0.5 ms
50 Hz ±0.01% (Crystal control)
Adjustable: 0.3 → 20 W
1.3 – 1.6 x Pnom / 25°C
1.6 – 2 x Pnom / 25°C
3.5 x Pnom
Up to 2 x Pnom
0.1 – 1
Overload/Overheat/Short-circuit/Reverse polarity by internal fuse
IP 20 complies with DIN 40050/IP 23 with top cover
From 45°C ± 3°C
75°C ± 3°C
> 5x Pnom/Unom (recommended value)
Without ventilation: < 10 dB
EN 61000-6-1, EN 61000-6-3, EN 55014, EN 55022, EN 61000-3-2,
Dir. 89/336/EEC, LVD 73/23/EEC
SI V3.0 E
1212 1624 2324
1224 2348
1248
24 24V/48
1200 1600 2300
21 25/17
4.8 5.8
< 0.5 < 0.5 < 0.6
93 - 95 95
391 391 591
13.2 15.2 27
With ventilation:< 35 dB
SIxxxxPE
SIxxxxTP
C-IP23
SIxxxxA
SIxxxS
SIxxxxIND
SI in industrial casing 19'' rack
3324 3548
24 48
3300 3500
25 30
9 13 17
< 0.7 < 0.8
95 95
636 791
30 38
10