Klarfit Jumpstarter Mode D'emploi page 39

Connect half of the metal rods (G) one by one with the nuts to form a long
metal rod. Connect the other half of the metal rods (G) with the nuts one
after the other to form a second long metal rod.
8
Push the two long metal rods into
the top pocket of the safety net as
shown in the picture.
Hang the circular metal rods of the safety net into the plastic holders of the
metal rods mounted vertically on the trampoline as shown. Two adults are
required for this assembly step.
7
9
Connect the ends of the two long
metal rods to form a circle.
10
EN
39